YOKOMO RS2.0 (PRE-ORDER)
CA$300.00
CA$300.00
per item
The Yokomo RS2.0 is an ideal entry-level touring car kit if you're just getting started in RC racing
The main chassis and upper deck are made of resin, allowing for a smooth ride with a strong sense of contact with the ground. The front and rear belts are the same length, so there are few quirks in the behavior in response to throttle operation, and the main feature is its straightforward cornering. In addition, the RS2.0 has a completely new motor mount, which allows it to be equipped with a brushed motor as is. The compatibility with a wider range of power sources has also been expanded, making it easier to handle
The RS2.0 features new short shocks front and rear to achieve a lower center of gravity. The springs can also be used with current competition touring cars, greatly expanding the range of settings
Specifications:
The main chassis and upper deck are made of resin, allowing for a smooth ride with a strong sense of contact with the ground. The front and rear belts are the same length, so there are few quirks in the behavior in response to throttle operation, and the main feature is its straightforward cornering. In addition, the RS2.0 has a completely new motor mount, which allows it to be equipped with a brushed motor as is. The compatibility with a wider range of power sources has also been expanded, making it easier to handle
The RS2.0 features new short shocks front and rear to achieve a lower center of gravity. The springs can also be used with current competition touring cars, greatly expanding the range of settings
Specifications:
●Front and rear short shocks and shock towers
●Front and rear equal length belts
●Center motor layout
●Front and rear gear differentials
●Front and rear universal shafts
●Turnbuckle upper arms and tie rods
●Aluminum motor mount (compatible with both brushed and brushless motors)
●Battery holder that can accommodate a battery pack
●Full bearings
●Front and rear equal length belts
●Center motor layout
●Front and rear gear differentials
●Front and rear universal shafts
●Turnbuckle upper arms and tie rods
●Aluminum motor mount (compatible with both brushed and brushless motors)
●Battery holder that can accommodate a battery pack
●Full bearings
A large urethane bumper is installed at the front of the chassis to protect the machine in the event of a crash
The shortened plastic oil shocks and springs significantly lower the center of gravity, dramatically improving the machine's maneuverability
An oil filled gear differential is used for the front drive, providing good maneuverability and offering easy-to-handle cornering characteristics
The RS2.0 features front and rear double wishbone suspension and all upper arms and tie rods are turnbuckle type, so camber and toe-in can be easily adjusted
The servo resin servo mount securely holds the servo in place by enveloping it, which contributes to improved steering response
The motor mount is now shaped to accommodate both brushed and brushless motors, and a motor guard has been added to reduce damage to the motor in the event of a crash
The motor mount is made of sturdy aluminum and has excellent heat dissipation. It is joined to the front and rear upper decks to increase chassis rigidity
The battery holder is compatible with round Sub-C 6-cell batteries as well as square Li-po batteries
The two-belt drive with equal length belts at the front and rear provides good drive balance and little disturbance in behavior when the throttle is on, making it very stable even when cornering
The rear drive is also equipped with a gear differential. It is an oil-filled sealed case, so the driving characteristics can be adjusted by changing the viscosity of the oil
All drive shafts are supported by ball bearings to minimize drive loss. The front and rear drive shafts are also universal shafts, which allows for high drive efficiency to be maintained even when the suspension is activated or the steering is turned
Racing-type short shocks improve driving performance. The springs used for the current competition models can also be used, greatly expanding the range of settings
The Yokomo Rookie Speed RS2.0 is a racing spec car with an ultra low center of gravity and increased stability, delivering the ultimate performance for an entry level touring car
Instruction Manual:
Required Items:
The Yokomo RS2.0 kit requires assembly and the following items to complete:
If you're new to RC touring car racing, be sure to check out the "GET STARTED" guide for more info on what equipment to choose
- Radio control and receiver
- Speed Controller (ESC)
- Servo
- Battery (Sub-C 6 cells or Li-po 2 cells)
- Charger
- Motor
- Wheels and Tires
- Body and Paint
- Diff fluid
If you're new to RC touring car racing, be sure to check out the "GET STARTED" guide for more info on what equipment to choose