MANZO46 Carbon Body Stiffeners (2)
CA$12.05
CA$12.00
CA$12.00
per item
Manzo46 carbon body stiffeners are the perfect solution to stiffen the sides of the particularly light 1:10 touring car bodies.
Especially the very thin 0.4 or 0.5mm bodies like to start fluttering at high speeds. With the Body Stiffeners from Manzo46 this has now come to an end!
The thin carbon fibre rods are extremely light (only 0.7g per part), and can be attached from the inside on the roof, and on the side of the body.
Here you can either use a glue (e.g. Shoegoo) or a M3 screw with nut. If you want to screw the parts on, you only have to drill a lock into the two plastic parts at the ends of the carbon fibre rod with a body reamer - done!
The Manzo46 body stiffeners allow you to use very light bodies even on fast tracks and in windy conditions!
Content: 2 x Manzo46 Carbon Fiber Body Stiffeners (for one body)
Especially the very thin 0.4 or 0.5mm bodies like to start fluttering at high speeds. With the Body Stiffeners from Manzo46 this has now come to an end!
The thin carbon fibre rods are extremely light (only 0.7g per part), and can be attached from the inside on the roof, and on the side of the body.
Here you can either use a glue (e.g. Shoegoo) or a M3 screw with nut. If you want to screw the parts on, you only have to drill a lock into the two plastic parts at the ends of the carbon fibre rod with a body reamer - done!
The Manzo46 body stiffeners allow you to use very light bodies even on fast tracks and in windy conditions!
Content: 2 x Manzo46 Carbon Fiber Body Stiffeners (for one body)